SKYWORKS AAT4280IGU-1-T1

Manufacturer No:

AAT4280IGU-1-T1

Manufacturer:

SKYWORKS

Package:

SOT-23-6

Description:

5V P-Channel 0.95mm PMIC ASPM? Series 6 Pin 5V SOT-23-6

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

AAT4280IGU-1-T1 information

SKYWORKS AAT4280IGU-1-T1 technical specifications, attributes, parameters and parts with similar specifications to SKYWORKS AAT4280IGU-1-T1.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
SOT-23-6

Surface Mount
YES

Number of Pins
6

Operating Temperature
-40°C~85°C TA

Packaging
Cut Tape (CT)

Series
ASPM?

Published
2005

Feature
Load Discharge, Slew Rate Controlled

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
6

Resistance
120MOhm

Subcategory
Power Management Circuits

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.95mm

Reach Compliance Code
unknown

Current Rating
2.3A

Number of Outputs
1

Qualification Status
Not Qualified

Output Type
P-Channel

Operating Supply Voltage
5.5V

Power Supplies
5V

Number of Channels
1

Interface
On/Off

Analog IC - Other Type
SPST

Output Configuration
High Side

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Switch Type
General Purpose

Min Input Voltage
1.5V

Max Input Voltage
5.5V

Supply Current-Max (Isup)
0.004mA

Ratio - Input:Output
1:1

Voltage - Load
1.81V~5.5V

Fault Protection
UVLO

Switch-on Time-Max
40000ns

Rds On (Typ)
80m ?

Length
2.85mm

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for SKYWORKS AAT4280IGU-1-T1.

Datasheets:

skyworkssolutionsinc-aat4280igu1t1-datasheets-0938.pdf

AAT4280IGU-1-T1 Overview

It is packaged in the form of a Cut Tape (CT).It is included with the SOT-23-6 package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.A total of 6 terminations can be found in it.During operation, the 6 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2.3A.It is possible to obtain high efficiency with a supply voltage of 5V.In this case, there is 120MOhm resistance in the LED driving board.It is included in the ASPM? series.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.This LED driving board uses an analog IC SPST.A total of 1 channels are available for you to choose from.It has a power supply of 5V.For maximum efficiency, the supply voltage should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 1.5V volts for this LED driver.In order to operate at its maximum capacity, the supply current must not exceed 0.004mA.

AAT4280IGU-1-T1 Features

Supplied from 5V
Resistance of 120MOhm
1 channels

AAT4280IGU-1-T1 Applications

There are a lot of Skyworks Solutions Inc.
AAT4280IGU-1-T1 Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.