74FCT16952ETPAG-Renesas-Price, Stock & Datasheet

74FCT16952ETPAG Overview

The TSSOP package is neat. In order to package this voltage buffer, the Rail/Tube external package is used. We use all 2 elements. The ethernet transceiver has 56 terminations with different functions. There is a voltage requirement of 5V. Electronic parts from the FCT family are used in this part. A total of 56 pins are included with the electric component. This logical driver can be used in Surface Mount different applications. The pin count is 56. 2 ports are included in this logic device. Each element uses 8 bits. Bus Driver/Transceivers is a specific type of buffer. As long as the electronic component is in the quiescent state, it uses 5?A. Use a 5V power supply if possible. When running the electronic part in a circuit, it is recommended that users apply 5V supply voltage. For better service, it includes WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION. A high-quality communication channel is provided by 16 channels in this logic IC. Operating temperatures as low as -40°C are possible. No more than 85°C should be the ambient temperature when automotive buffer is operating. In its low-level output mode, it outputs 32mA. When operating in high-level output mode, the electronic component can conduct up to 64mA. At the very least, the voltage used to operate this electrical component should be at least 4.5V. There is a 5.5V maximum supply voltage rating on it. REGISTERED BUS TRANSCEIVER logic ICs are called that. A POSITIVE EDGE trigger is included in this transceiver, which allows it to monitor logic analyzer inputs for a specified pattern. Under INDEPENDENT CONTROL control, the logical driver starts up.

74FCT16952ETPAG Features

Bus Driver/Transceivers
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
High Level Output: 32mA
Low Level Output: 64mA
REGISTERED BUS TRANSCEIVER Logic IC
Trigger Type: POSITIVE EDGE