74CBTLV3125NSRG4-TI-Price, Stock & Datasheet

74CBTLV3125NSRG4 Overview

Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.209, 5.30mm Width).It is packaged according to the Tape & Reel (TR) method.The mounting method digital switch ic uses is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBTLV series are suitable for a wide range of applications.There are 14 terminations included in its basic configuration.The base part number is 74CBTLV3125, which is also useful when looking up signal switch's related components.In this case, 2.5V is the voltage supplied to the multiplexer's system.Signal switch has 14 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.This multiplexer ic has 14 pins configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.In this signal multiplexer, there are 4 bits that are provided.Vsup should be kept at 2.3V to prevent some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.In order to maintain mux switch's normal operation, power is provided to 2.5/3.3V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.This signal switching operates at a resistance of 2.As far as the resistance is concerned, it operates with 7Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.