74ALVT16501DGG,112-NXP-Price, Stock & Datasheet

74ALVT16501DGG,112 Overview

The package 56-TFSOP (0.240, 6.10mm Width) contains this file embedded in it. I have packaged it in a way that is similar to Tube's. A 18-Bit circuit is used for achieving its superior flexibility as a result of its use of 18-Bit circuits. As far as the logic type of this electrical device is concerned, it is Universal Bus Transceiver. I have mounted this electronic part in the way of Surface Mount in this way. It is recommended that the operating temperature be higher than -40°C~85°C. In addition, 8mA 24mA; 32mA 64mA features the highest level of flexibility in its design due to its high and low output currents. An FPGA belonging to the 74ALVT series is a type of FPGA. There is a supply voltage of 2.3V~2.7V 3V~3.6V that it operates on. 74ALVT16501 family is the family in which it belongs. It is possible to use 56 terminations, which are the ends of a transmission line which should be connected to a device whose characteristic impedance matches that of the transmission line. For normal operation, the supply voltage must be kept above 2.5V in order for the device to function properly. In addition, it is equipped with a 56 pin count. In order to design this electronic part, 18 Bits have been used. There are a number of termination types, including 2 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. Upon reaching 2.7V, the maximum supply voltage (Vsup) is reached. It is recommended that the supply voltage (Vsup) should be greater than 2.3V. A 3.3V power supply is used to operate it. It is configured with a trigger that uses a POSITIVE EDGE-value. There is also another characteristic of it that has to do with WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; CAN ALSO OPERATE AT 3.3V VCC. There is a part included in Bus Driver/Transceivers that is similar to this one.