71V67903S75PFG-Renesas-Price, Stock & Datasheet

71V67903S75PFG Overview

As far as its memory type goes, it falls into the RAM, SDR, SRAM category. TQFP case encloses it. There is 1.1MB of memory on the chip. There are 100 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 100-pin package that encloses the device. It is worth noting that this memory device has 100 pins, which indicates it has 100 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 265mA. Despite all its benefits, this memory chip also offers FLOW-THROUGH ARCHITECTURE for improved system performance. Using 1 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 3.135V volts. The operating voltage of the memory ics shall not exceed 3.465V. There is an 117MHz frequency with which this memory chip processes data. In this Memory chip, the maximum frequency is 117MHz.

71V67903S75PFG Features

Package / Case: TQFP
100 Pins
Operating Supply Voltage:3.3V
Additional Feature:FLOW-THROUGH ARCHITECTURE
I/O Type: COMMON
Freguency at 117MHz
117MHz terminals