71V632S7PFGI-Renesas-Price, Stock & Datasheet

71V632S7PFGI Overview

As far as its memory type goes, it falls into the RAM, SDR, SRAM category. TQFP case encloses it. There is 256kB of memory on the chip. There are 100 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 100-pin package that encloses the device. It is worth noting that this memory device has 100 pins, which indicates it has 100 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 160mA. Despite all its benefits, this memory chip also offers ALSO REQUIRES 3.3V I/O SUPPLY for improved system performance. Using 1 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least -40°C. Temperatures over 85°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 3.135V volts. The operating voltage of the memory ics shall not exceed 3.63V. There is an 66MHz frequency with which this memory chip processes data. In this Memory chip, the maximum frequency is 66MHz.

71V632S7PFGI Features

Package / Case: TQFP
100 Pins
Operating Supply Voltage:3.3V
Additional Feature:ALSO REQUIRES 3.3V I/O SUPPLY
I/O Type: COMMON
Freguency at 66MHz
66MHz terminals