71V3577S80BGG-Renesas-Price, Stock & Datasheet

71V3577S80BGG Overview

A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. Embedded in the BGA case, memory ics is a single file. On the chip, there is an 512kB memory, which is the size of the chip's memory. A total of 119 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 119-pin package containing this memory device is used to house this device. The memory device in question has 119 pins, thus indicating that it has 119 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 200mA for this memory component. This chip features all the merits of a conventional chip, but it also features FLOW THROUGH ARCHITECTURE to improve system performance. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3.135V. An operating voltage of no more than 3.465V is required. A frequency of 100MHz is used to process the data on this memory chip. A ic memory chip with this frequency has a maximum speed of 100MHz.

71V3577S80BGG Features

Package / Case: BGA
119 Pins
Operating Supply Voltage:3.3V
Additional Feature:FLOW THROUGH ARCHITECTURE
I/O Type: COMMON
Freguency at 100MHz
100MHz terminals