2308A-1DCG8-Renesas-Price, Stock & Datasheet

2308A-1DCG8 Overview

Clock ICs are packaged using the Tape and Reel method. In the SOIC package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 16 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, LVTTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 133.3MHz. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. A 16 pin is available on the clock PLL. In addition to having an impressive low-temperature performance, this clock device can perform 0°C operations simultaneously. This RF synthesizer can last with attenuated performance at 70°C. Clock PLL is capable of handling a voltage of 3.3V. A Clock Drivers clock generator is essentially what this device is. The timing skew of this frequency synthesizer is low at 0.2 nsmax. There are 8 pins configured for enabling high true outputs on this clock generator. 2308-family clock generators are similar. In order to supply this clock PLL, a voltage greater than 3.6V is not acceptable. This RF synthesizer can operate at a voltage as low as 3V. In PLL BASED CLOCK DRIVER logic circuits, this electronic frequency generator is used primarily as a clock component.