SN74BCT574DBRE4-TI-Price, Stock & Datasheet

SN74BCT574DBRE4 Overview

The flip flop is packaged in 20-SSOP (0.209, 5.30mm Width). Package Tape & Reel (TR)embeds it. As configured, the output uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74BCTseries contain this type of chip. It should not exceed 77MHzin its output frequency. In total, there are 1 elements. There is a consumption of 8mAof quiescent energy. Currently, there are 20 terminations. The 74BCT574family includes it. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 5.5pFfarad input capacitance. Devices in the BCT/FBTfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. An electronic part designed with 8bits is used in this application. As soon as 5.5Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 4.5V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. It runs on 5Vvolts of power. A D flip flop with 2embedded ports is available. It has 3 output lines to operate. As of now, there are 8input lines.